Self-Made Peanut Bag for Packing

EchomerxBlog — Thu, 01 Apr 2010 07:43:41 +0000

Packing peanuts, sometimes called packing popcorn, are loose-fill packing materials, usually made out of expanded polystyrene foam. In the early days, peanuts were made of styrofoam and could easily be crumbled and broken into tiny pieces, or blown away. So most companies don’t recycle them.

However, some companies do recycle these peanuts and put them back to good use. At Echomerx, we recycle packing peanuts of all grades. We’ve come up with a simple way to pack the peanuts using recycled anti-static shielding bags, commonly found here in Silicon Valley, so the peanuts can be re-used easily.

All it takes are some used plastic poly bags, and a bag sealer. Our anti-static shielding bags were donated to us by a neighbor company when they moved out of the complex. These bags are very durable, and they also look nice (they’re made with a shimmery, metallic plastic). This makes them the perfect tool to use when packing boxes.

Step 1. Fill the anti-static shielding bag with packing peanuts. When you pack them, leave at least a 1″ space near the top so the bag can be sealed. To be more economical with your packing peanuts, fill about 1/5 of the space inside the bag with air.

Anti-static shielding bags can be used to protect electronics from ESD (electronic static discharge) damage. It’s an absolute must-have for those high-tech manufacturers in the Silicon Valley, because they handle so many ESD-sensitive materials. These bags are manufactured by depositing a thin metal coating, such as aluminum, over an anti-static polyester film substrate. The metallized layer protects the devices inside the bag from electrostatic fields, while the insulated layers prevent direct contact with potential ESD hazards.

Step 2. Seal the bags using a bag sealer. Depending on the thickness and materials of your poly bag, adjust the settings on the bag sealer. The perfect setting will seal the bag without overheating it, and it will leave a smooth seamline of about 1/8″ wide where the bag is sealed. Overheating can cause the bag to not be completely airtight, and this will weaken the packing.

Many simple bag sealers come with different settings. To test the strength of the seal, pull the flaps apart with a reasonable amount of force, and see if the sealing comes apart. Sealers work with localized heat to bond the two layers of plastic together, and is a very safe way to close these bags.

Step 3. After sealing, check the sealed edge; if the seal is perfect, these bags should be able to serve the same purpose as airbags. If you don’t have these anti-static shielding bags around, you can also use some regular poly bags instead. However, make sure to dial down the settings of the bag sealer to avoid overheating.

These three steps are extremely easy to follow. By using these packing peanuts, the recipients of your packaging can also follow your lead by re-using them again. It’s a wonderful way of reducing waste and helping to save the environment!

At the time of this post, Mercury News just published the article, “San Bruno polystyrene ban takes effect today, business owners unhappy.” Here is an excerpt from the article.

“The council took aim at Styrofoam because it ends up as litter and isn’t recycled by San Bruno’s waste hauler, Recology,” said city official Jim Shannon. A 2009 fact sheet compiled by national advocacy group Clean Water Action says polystyrene foam breaks into smaller pieces when exposed to the elements. Styrene, which is used to make polystyrene, increases the risk of leukemia and lymphoma, according to the group.”

DIY Eco-Friendly Gift Wrap

EchomerxBlog — Thu, 11 Mar 2010 01:47:12 +0000

This “wrapping” season, let’s try something creative AND eco-friendly, using fragments of paper and

miscellaneous items from around your house. Save money, save earth and enjoy the work of art.

Two Fragments

Ribbon Join

This wrap uses two pieces of typical wrapping paper. These fragments often have damaged parts. When you cut them away you are left with odd-shaped pieces. The fearless wrapper applies the striped piece first, then adds a second piece along the angled edge of the stripes.

Easy: A ribbon is applied along the edge where the two papers join. It precludes the need for a perfect cut along the join. The ribbon can be taped on the back of the box. If necessary you can use rolled-tape strips or glue gun to overcome challenges of ribbon placement.

Contrast: stripe/floral. Foil/flat.

Different Paper

While wrap art can be made with scraps of regular wrapping paper, I also save special papers. The yellow paper is an art paper. The checkered paper was a shopping back. Their contrast is a delight. The white bow brings it all back into the realm of gift wrapping.

Contrast: color/black & white. pattern/solid. The bow’s shiny complexity/the yellow’s flat simplicity.

Small Package

The two-fragment technique is an obvious choice for little packages. It uses up small pieces of charming paper. Thus it justifies saving small pieces of charming paper.

Easy: The ribbon smoothly joins the two papers, hiding the papers’ cut edges. Tape it on the back.

Contrast: bright color/dull color. Pattern/no pattern.

Contrast Cap

The paper you have on hand may not fit the gift box. Take an even smaller piece of paper, like the red paper here, and wrap one end of the box. Then wrap the remaining part of the box. Finish with ribbon taped to the back, and a bow.

Contrast: the flat red contrasts with the fibrous green paper. The rough deckle edge contrast with smooth red paper. The green paper is light; the red paper is dark.

Easy: the gold ribbon tapes to the back.

Contents and images are originally from http://www.boakart.com/wrap/WrapArt.html.